Shovel Project

Before and after I tore it down.

Shovel Project

I made this bracket to hold the Capacitor up under the

tank. I wrapped it in a piece of rubber and it is held in 

with a zip tie. I plan to ground it on one of the mounting

bolts. I also drilled several holes in the bottom

so any moisture would drain.

Vantastic!

I think this is a 1969, either way its

incredible! I'm back on the van hunt,

maybe trade the dodge.

Custom BMX seat!

Johnny and I put together this seat

from some tuck and roll I sewed up for his Bmx.

Now all the hipsters are going to have to get

vintage Bates seats for their fixed gear bikes.

Clock I made awhile back

I made this for a design contest that was

put on by Furnicreations.com 

They make some really cool stuff,

most of the stuff they make is named

after old skaters. I thought I should of

won but I got beat by a total ringer 

with a wall mount clock that was

done well and similar in design to mine.

Triumph Racer

Theo Ozen's dry lakes bike.

Love the looks of this trump,

all business!

Motor Cycles Den?

Cool Japanese bike non the less,

franks fender

Nice paint

I'm really liking the paint scheme on these two 

bikes the top one is from Love Cycles I believe 

and the bottom might be Max Schaaf but I'm not sure.

Split tank

I really like the GMA tank thats on my bike now but,

I started making this split sporty tank and its coming out so well

that I may have to use it!

Shovelhead build coming along!

Ive mostly been getting little things done on the

Shovel like lowering the forks, finding cables,

spacing the front wheel, making a kickstand stop and

exhaust mounts. 

A tail light I made from an old oil gauge.

I decide the pipes were too boring so,

I decided to kick them up on the ends

and add some evo flanges as tips.

A little progress on the rotocaster

Tangle Pipes

OIF from Speed Metal with some cool

tangle pipes.

Carnage Pics

Carnage On Larimer

Close to Home.

http://www.carnageonlarimer.com/

Fender Struts

I thought to long about this and then

just kept it simple.

New seat with a Biltwell hinge and the 

fender supports sticking out the side.

Seat progress?

Pulled some foam out of an old seat

and salvaged enough for the seat.

I even sewed up some tuck and roll for it.

Then I decided to use a seat I already had,

I'm gonna finish it but the other seat

has a simpler look.

I think these gay fuckers are

way better than the other gay fuckers.

Check it out.

Chopcult.com

Seat pan

Finished making this seat pan

through some paint on it to prevent rust

now I can get to covering it.

I ended up welding a few supports to the back side 

to stiffen it up a bit and made a clip to attach to the frame.

Building a Rotocaster!

Found this motor at a local surplus store,

Found some gearing and chain, still need

a few more gears to slow the 6 rpm 

motor down to 3-4 rpms.

My welding is improving, 

I'm happy with at least 50% of these.

Got the base started a done after work today.

Exhaust is Exhausting

I started anew with the rear pipe because the first one

I made was, well, kinda crappy and it really took away from 

a much better effort on the from pipe. I guess at least

I have the ability to notice when I jacked something up 

and correct my mistakes. The new one flows much better,

fills in the space between the oil bag and trans better and

compliments the front pipe better. 

this weekend I'm tackling the exhaust mounts, relocating 

the regulator, and finishing the seat pan mounts. 

I really cant wait to start stitching the seat, four 

semesters of industrial sewing in Pat Fushimi's

class in high school will hopefully come back to me, and

prove useful!